http://WWW.BHARATLABS.IN
BHARATSCIENTIFICWORLD 59db2a8962269909a06731a6 False 414 48
OK
background image not found
Found results for
'bottom heated'
Autoclave INR   0 INR  0
-NaN%

Autoclave

An Autoclave is a pressure chamber used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C (249°F) for around 15–20 minutes depending on the size of the load and the contents. Sterilization autoclaves are widely used in microbiology, medicine, podiatry, tattooing, body piercing, veterinary science, mycology,funeral homes, dentistry, and prosthetics fabrication. They vary in size and function depending on the media to be sterilized.Typical loads include laboratory glassware, other equipment and waste, surgical instruments and medical A notable growing application of autoclaves is the pre-disposal treatment and sterilization of waste material, such as pathogenic hospital waste. Machines in this category largely operate under the same principles as conventional autoclaves in that they are able to neutralize potentially infectious agents by utilizing pressurized steam and superheated water. A new generation of waste converters is capable of achieving the same effect without a pressure vessel to sterilize culture media, rubber material, gowns, dressing, gloves, etc.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Hot air oven INR   0 INR  0
-NaN%

Hot air oven

We are offering our quality products Hot Air Oven (Bottom Heated).Outer body of M.S. sheet, powder coated, inner chamber choice of Aluminum / stainless steel. Insulation: Glass wool 65 mm.thick, provided to reduce the heat loss to the economical minimum,provided with adjustable and removable SS/aluminum shelves. High quality imported heating elements and thermostat ensures long life and accuracy receptively. Other details: Temp: controlled by: Imported Hydraulic Thermostat Digital Electronic Temp: controller. Models available with air circulation fan. An AC TEFC long shaft motor is coupled with centrifugal impeller type fan at the back side and provided extra space for air circulation. Temp: range ambient +5 C to 200 C, Accuracy: ±1 C at higher Temp, Supplied with out thermometer, Hot Air Oven (Bottom Heated)

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Water Bath INR   0 INR  0
-NaN%

Water Bath

A Water Bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. All water baths have a digital or an analogue interface to allow users to set a desired temperature. Utilisations include warming of reagents, melting of substrates or incubation of cell cultures. It is also used to enable certain chemical reactions to occur at high temperature. Water bath is a preferred heat source for heating flammable chemicals instead of an open flame to prevent ignition. Different types of water baths are used depending on application .When temperature is above 100 °C, alternative methods such as oil bath, silicone bath or sand bath may be used

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Fume hood INR   0 INR  0
-NaN%

Fume hood

A Fume Hood or fume cupboard is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts. A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.It comes with different sizes. It has following uses protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes); protect the product or experiment (biosafety cabinets, glove boxes); protect the environment (recirculating fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstream).

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false