http://WWW.BHARATLABS.IN
BHARATSCIENTIFICWORLD 59db2a8962269909a06731a6 False 414 48
OK
background image not found
Found results for
'pressure chamber'
Autoclave INR   0 INR  0
-NaN%

Autoclave

An Autoclave is a pressure chamber used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C (249°F) for around 15–20 minutes depending on the size of the load and the contents. Sterilization autoclaves are widely used in microbiology, medicine, podiatry, tattooing, body piercing, veterinary science, mycology,funeral homes, dentistry, and prosthetics fabrication. They vary in size and function depending on the media to be sterilized.Typical loads include laboratory glassware, other equipment and waste, surgical instruments and medical A notable growing application of autoclaves is the pre-disposal treatment and sterilization of waste material, such as pathogenic hospital waste. Machines in this category largely operate under the same principles as conventional autoclaves in that they are able to neutralize potentially infectious agents by utilizing pressurized steam and superheated water. A new generation of waste converters is capable of achieving the same effect without a pressure vessel to sterilize culture media, rubber material, gowns, dressing, gloves, etc.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Hot air oven INR   0 INR  0
-NaN%

Hot air oven

We are offering our quality products Hot Air Oven (Bottom Heated).Outer body of M.S. sheet, powder coated, inner chamber choice of Aluminum / stainless steel. Insulation: Glass wool 65 mm.thick, provided to reduce the heat loss to the economical minimum,provided with adjustable and removable SS/aluminum shelves. High quality imported heating elements and thermostat ensures long life and accuracy receptively. Other details: Temp: controlled by: Imported Hydraulic Thermostat Digital Electronic Temp: controller. Models available with air circulation fan. An AC TEFC long shaft motor is coupled with centrifugal impeller type fan at the back side and provided extra space for air circulation. Temp: range ambient +5 C to 200 C, Accuracy: ±1 C at higher Temp, Supplied with out thermometer, Hot Air Oven (Bottom Heated)

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Laminar Air Flow INR   0 INR  0
-NaN%

Laminar Air Flow

Laminar Flow Cabinet from top to down stream through the inverted HEPA filter placed on the top of the work space, working table is made with satin finish stainless steel top. The inner cabinet is made with marine plywood and outer covering is made with C.R sheet duly powder coated, front door with transparent acrylic provided with counter weight attachment for sliding operation and keep the door at required level. Sides of the cabinet is paneled with poly carbonate transparent sheet. Fitted with all standard accessories such as U.V. germicidal light, fluorescent light, provided cock for as gas/air, pre filter & HEPA filter, inclined pressure manometer. Other details: Working area in cm Approx.external dimension L X W X H in cm in cm 60 x 60 x 60 70 x 76 x 19890 x 60 x 60 98 x 76 x 198120 x 60 x 60 128 x 76 x 198180 x 60 x 60 188 x 76 x 198

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Bod Incubator INR   0 INR  0
-NaN%

Bod Incubator

BSW BOD Incubator are low temperature incubators. It can maintain a temperature range of 5°c to 60°C. It is of most important lab equipment in research centers, hospitals , micro biology, biotechnology, pharmaceutical labs. Our BOD Incubator is made of double walled construction. The exterior chamber is made of high grade Mild steel with powder coated finish. This coating keeps safe the units from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Its Available in different sizes.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Laminar Air Flow INR   0 INR  0
-NaN%

Laminar Air Flow

Laminar air flow Horizontal Flow A unit to provide clean air, removes dust particles, double filtration of air through, pre filters and HEPA filters. Basically the laminar flow cabinet made of wood and Plywood. All exterior surfaces are covered with white laminated sheet, all the interior portions are epoxy painted and made termite proof weather resistant. Stainless steel table top is also available, front and side of the working table are paneled with 2 mm polycarbonate transparent glass door. Equipped with U.V. Germicidal light, Fluorescent light, provided cock for gas / air, prefilter & Hepa filter, static inclined pressure manometer Working Area Approx. external dimension in cm L x W x H in cm 60 x 60 x 60 65 x 100 x 155 90 x 60 x 60 95 x 100 x 155 120 x 60 x 60 125 x 100 x 155 180 x 60 x 60 187 x 100 x 155 b) Laminar air flow Vertical BSW make Laminar flow cabinet (Vertical flow) : - Fitted with all standard accessories stated in the horizontal manner Laminar Flow Cabinet. Cleanliness class 100 with an efficiency 99.9% Particle retention 0.3 microns and above. Working Area App. L x W x H in cm 60 x 60 x 60 70 x 76 x 198 90 x 60 x 60 98 x 76 x 198 120 x 60 x 60 128 x 76 x 198 180 x 60 x 60 188 x 76 x 198 We also have lab equioments, lab instruments, lab furniture, lab turnkey projetcs

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false